DWX-4 compact dental mill

DWX-4 Dental Milling System Applications

DGSHAPE DWX series dental mills are capable of producing a variety of dental restorations from a wide range of materials with high precision. The DWX-4 features 4-axis simultaneous milling and a 2-station automatic tool changer for unattended milling of standard blocks  and pin-type materials. An optional 4-position automatic tool changer supports up to four tools of varying sizes while the optional multi-pin clamp allows you to mill up to four different pin-type materials simultaneously.



  • Wax for lost-wax castings of gold or leucite
  • Porcelain for PFM (porcelain-fused-to-metals such as alumina)
  • Zirconia
  • PMMA
  • VITA ENAMIC hybrid ceramic
  • 3M ESPE Ultimate CAD/CAM Restorative nano ceramic resin


For permanent full coverage restorations, or dental implants strength, margins and aesthetics are key considerations. With 4-axis simultaneous milling and a 2 or 4-station automatic tool changer, the DWX-4 can mill a single crown in approximately 20 minutes from zirconia, wax or PMMA. You can also mill precision crowns from newer ceramic materials that don’t require sintering, including standard blocks of VITA ENAMIC hybrid ceramic.


Copings can be easily milled by the DWX-4 from Zirconia or Wax, once processed porcelain can be applied to provide you with highly Aesthetic Restorations.


The DWX-4 can mill small bridges from Zirconia, Wax or PMMA Materials.


The DWX-4 is capable of milling a variety of abutments including hybrid, screw, glue-based, etc., from a variety of restorative materials.

Inlays and Onlays

Indirect inlays and Onlays can be milled from Zirconia, Wax or Hybrid Composite materials. With its optional 4-station automatic tool changer, the DWX-4 provides the ability to produce the required sharp angles from small tools.