MDX-40A benchtop milling machine

MDX-40A Milling Machine Specifications

MODEL MDX-40A
Acceptable materials  Resins such as chemical wood and modeling wax (metal not supported)
X, Y, and Z strokes 305 (X) x 305 (Y) x 105 (Z) mm
(12 (X) x 12 (Y) x 4-1/8 (Z) in.)
Distance from spindle tip to table Maximum 123 mm (4-13/16 in.)
Table size 305 (W) x 305 (D) mm
(12 (W) x 12 (D) in.)
Loadable workpiece weight 4 kg (8.8 lb)
XYZ-axis motor Stepping motor
Feed rate XY-axis: 0.1 to 50 mm/sec. (0.0039 to 1.9 in./s),
Z-axis: 0.1 to 30 mm/sec. (0.0039 to 1.1 in./s)
Software resolution NC-code: 0.001mm/step (0.000039 in./step),
RML-1: 0.01 mm/step (0.00039 in./step)(RML-1)
Mechanical resolution 0.002 mm/step (0.00008 in./step)(Micro-step)
Spindle motor Brushless DC motor, Maximum 100 W
Spindle rotation 4500 to 15000 rpm
Tool chuck Collet
Interface USB (compliant with Universal Serial Bus Specification Revision 1.1)
Power supply Voltage and frequency  AC100 to 240 +/-10%, 50/60 Hz
Required power capacity 2.1 A
Power consumption Approx. 210W
Acoustic noise level No-load operation: 56 dB (A) or less, Standby: 42 dB (A) or less
Dimensions 669 (W) x 760 (D) x 554 (H) mm
26-3/8 (W) x 29-15/16 (D) x 21-13/16 (H) in.
Weight 65 kg (143.3 lb)
Operation temperature 5 to 40°C (41 to 104°F )
Operation humidity  35 to 80% (no condensation)
Included items  Power cord, power plug adapter, USB cable, collet, Z0 sensor, hexagonal wrench, hexagonal screw drivers, spanners, Roland
System Requirements for Inlcuded Software
OS Windows Vista®(32bit edition) or Windows® XP (32bit edition) and Internet Explorer 6.0 or later
CPU Pentium® 4, 2.4GHz or faster recommended
RAM 1GB or more recommended
Free hard-disk space 20MB or more recommended
Video card and monitor A resolution of 1024 x 768 or more recommended, video card compatible with OpenGL recommended, and at least 16-bit
Optional Rotary Axis Unit (ZCL-40A)
Maximum angle of rotation +/-18 x 105° (+/-5000 rotations)
Maximum loadable workpiece size* 120 mm (4.7 in.) diameter by 270 mm (10.6 in.) long
Maximum thickness holdable by workpiece clamp 10 to 45 mm (0.4 to 1.8 in.)
Loadable workpiece weight 1kg (2.2 lb) (including clamps)
Feed rate 0.23-11.79 rpm
Mechanical resolution 0.005625 deg./step (Micro-step)
Dimensions 470 (W) x 286 (D) x 115 (H) mm
(18.5 (W) x 11.3 (D) x 4.5 (H) in.)
Weight 7.5 kg (16.5 lb)
Included items Y-origin sensors (large and small), Z-origin sensor, Y-origin detection pin, center drill, live center, hexagonal wrench, cap
*The range that can actually be cut is limited by the amount of tool extention and interference between the loaded workpiece
Optional 3D Scanning Sensor Unit (ZSC-1)
Maximum scanning area 305 (X) x 305 (Y) x 60 (Z) mm
(12.0 (X) x 12.0 (Y) x 2.3 (Z) in.)
Distance from probe tip to table Maximum 92.4 mm (3.6 in.)
Table load capacity Maximum 4 kg (8.8 lb)
Sensor Type Roland Active Piezo Sensor (RAPS)
Effective Probe Length 60 mm (2-5/16 in.)
Tip Bulb Radius 0.08 mm (0.00315 in.)
Minimum scan pitch .051 mm (.002 in)
Scanning method Contacting, mesh-point height-sensing
Operating speed XY-axis 15 to 30 mm/sec. (0.6 to 1.1 in./s)
Z-axis 1 to 30 mm/sec. (0.04 to 1.1 in./s)
Item Model Description
Rotary axis unit ZCL-40A See the above specifications
3D Scanning sensor unit ZSC-1 See the above specifications
Replacement spindle unit ZS-40 1GB or more recommended
Dust box ZDX-40 666 (W) x 769 (D) x 97 (H) mm
(26.33(W) x 30.27(D) x 3.8(H) in.)