| MODEL |
MDX-540 |
MDX-540S |
| Usable Materials |
Plastic, resin, wood and non-ferrous metals |
| XYZ-Axis Travel |
500 (X) x 400 (Y) x 155 mm (Z)1[9.6(X) x 15.7(Y) x 6.1"(Z)] |
| Milling Area with Optional Rotary Axis (ZCL-540) |
177.8mm Diameter x 370.8mm Length
[7.0” Diameter x 14.6” Length] |
| Distance From Spindle Nose to Table |
Maximum 254mm (10") |
| Table Size |
550(W) x 420mm (D) [21.7(W) x 16.5"(D)] |
| Loadable workpiece weight |
At acceleration of 0.2G: maximum 12kg (26lb), 0.1G: 20kg (44lb), 0.05G: 20kg (44lb) |
| XYZ-axis drive system |
AC servo motor, 60W |
AC servo motor, 80W |
| Operating speed |
Maximum 295ipm (7.5m/min) |
| Acceleration |
0.2G, 0.1G, 0.05G |
| Software resolution |
RML-1 mode: 0.01mm(0.0004"), NC-code mode: 0.001mm (0.00004") |
| Mechanical resolution |
0.001mm (0.00004”) |
| Positioning accuracy |
+/-0.1mm/300mm(+/-0.004"/12"), under no-load conditions |
| Repeat accuracy |
+/-0.05mm(+/-0.0019"), under no-load conditions |
+/-0.02mm(+/-0.0008"), under no-load conditions
|
| Origin reproducibility (when the power is switched on/off) |
+/-0.05mm (+/-0.0019") |
+/-0.02m (+/-0.0008") |
| Spindle motor |
DC brushless motor, maximum 400W |
| Spindle speed |
400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering |
| Tool chuck |
Collet method, maximum tool diameter: 10mm (0.4") |
| Control command sets |
RML-1 and NC codes |
| Interface |
USB (compliant with Universal Serial Bus Specification Revision 1.1) |
| Power supply |
Voltage and frequency: AC 100 to 120 V/220 to 240 V +/-10%, 50/60 Hz
Required power capacity: 7A (100 to 120V)/4A (220 to 240V) |
| Power consumption |
Approx. 700W |
| Acoustic noise level |
During operation (no cutting): 65dB (A) or less, during standby: 40dB (A) or less (according to ISO 7779) |
| Dimensions |
Width x depth x height: 745 x 955 x 858mm (29.3 x 37.6 x 33.8Z") |
Width x depth x height: 765 x 955 x 858mm (30.1 x 37.6 x 33.8Z") |
| Weight |
102kg (225lb) |
| Operating temperature |
5 to 40C (41 to 104F) |
| Operating humidity |
35 to 80% (no condensation) |
| Included items |
Handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal wrenches, Roland Software CD-ROM, SRP Player CD-ROM, User's Manual, Roland Software Guide, SRP Player Installation and Setup Guide, and NC Code Reference Manual |
|
| MODEL |
MDX-540A |
MDX-540SA |
| Usable Materials |
Plastic, resin, wood and non-ferrous metals |
| XYZ-Axis Travel |
400 (X) x 400 (Y) x 155 mm (Z)[15.7(X) x 15.7(Y) x 6.1"(Z)] |
| Milling Area with Optional Rotary Axis (ZCL-540) |
177.8mm Diameter x 370.8mm Length
[7.0” Diameter x 14.6” Length] |
| Distance From Spindle Nose to Table |
Maximum 254mm (10") |
| Table Size |
550(W) x 420mm (D) [21.7(W) x 16.5"(D)] |
| Loadable workpiece weight |
At acceleration of 0.2G: maximum 12kg (26lb), 0.1G: 20kg (44lb), 0.05G: 20kg (44lb) |
| XYZ-axis drive system |
AC servo motor, 60W |
AC servo motor, 80W |
| Operating speed |
Maximum 7.5m/min (295ipm) |
| Acceleration |
0.2G, 0.1G, 0.05G |
| Software resolution |
RML-1 mode: 0.01mm (0.0004"), NC-code mode: 0.001mm (0.00004") |
| Mechanical resolution |
0.001mm (0.00004”) |
| Positioning accuracy |
+/-0.1mm/300mm(+/-0.004"/12"), under no-load conditions |
| Repeat accuracy |
+/-0.05mm(+/-0.0019"), under no-load conditions |
+/-0.02mm(+/-0.0008"), under no-load conditions |
| Origin reproducibility (when the power is switched on/off) |
+/-0.05mm (+/-0.0019") |
+/-0.02mm (+/-0.0008") |
| Spindle motor |
DC brushless motor, maximum 400W |
| Spindle speed |
400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering |
| Tool chuck |
Tool holder format, Taper shank: JBS4002 15T |
| Control command sets |
RML-1 and NC codes |
| Interface |
USB (compliant with Universal Serial Bus Specification Revision 1.1) |
| Power supply |
Voltage and frequency: AC 100 to 120 V/220 to 240 V +/-10%, 50/60 Hz
Required power capacity: 7A (100 to 120V)/4A (220 to 240V) |
| Power consumption |
Approx. 700W |
| Acoustic noise level |
During operation (no cutting): 65dB (A) or less, during standby: 40dB (A) or less (according to ISO 7779) |
| Dimensions |
Width x depth x height: 745 x 955 x 858mm (29.3 x 37.6 x 33.8") |
Width x depth x height: 765 x 955 x 858mm (30.1 x 37.6 x 33.8") |
| Weight |
109kg (249lb) |
| Operating temperature |
5 to 40C (41 to 104F) |
| Operating humidity |
35 to 80% (no condensation) |
| Included items |
Handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal wrenches, Roland Software CD-ROM, SRP Player CD-ROM, User's Manual, Roland Software Guide, SRP Player Installation and Setup Guide, NC Code Reference Manual, and Automatic Tool Changer (Refer to the ZAT-540 specs below.) |
|
| |
Automatic Tool Changer (ZAT-540) |
Number of tools housed |
4
|
Maximum tool length
|
110mm (4.3”)
|
Maximum tool diameter
|
10mm (0.4”)
|
Maximum tool weight
|
350g (0.77lb)
|
Tool-holder format
|
Taper shank: JBS4002 15T
|
Tool-selection method
|
Direct-changing type, fixed-address specification
|
Compatible compressed air
|
102 to 145 psi, 1.8CFM (0.7 to 1.0 MPa, 50 L/min or higher)
|
Spindle speed
|
400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering
|
Weight
|
6.8kg (15lb) (total weight including spindle, magazine, control box, etc.)
|
Included items
|
Control box, magazine unit, ATC spindle, air cylinder, base plate, Z-origin sensor, spacer, cap screws, hexagonal wrenches, retaining bands, cable retainers, and user's manual
|
| |
|
|
